Short answer. Hurricane protection for hotels in Mexico helps manage the risk of damaged openings and lost room inventory. Hurricane Solution evaluates the building's openings. To decide what to protect, estimate the revenue at risk and review which areas, services, and inspections stand between each room and its return to inventory.

When you budget for hurricane protection for a hotel in Mexico, ask how many rooms could go out of order if certain glass walls or doors fail. The answer depends on which areas are affected and the work the hotel must finish before selling those rooms again.

Hurricane Solution has installed certified hurricane protection in Mexico since 2008. An opening is any window, door, or glass wall. A hurricane fabric screen is a removable textile barrier fastened over an opening to keep out wind, rain, and debris. For a hotel in Cancún, Los Cabos, or Puerto Vallarta, the evaluation ties those openings to how each area is used.

In this article

  • What RevPAR shows and what the operating inventory records.
  • How to estimate the room revenue exposed to a disruption.
  • Which dependencies affect reopening.
  • How to review the investment with engineering and finance.

What does RevPAR measure during a disruption?

RevPAR is revenue per available room. It equals room revenue divided by the rooms available in the period, on whatever inventory basis the report uses. Check the STR Benchmark definition and apply consistent criteria when you compare periods.

Also keep a physical log of out-of-order rooms and unavailable nights. If the available-room base changes, the metric can move in ways that hide part of the disruption. Management should see RevPAR next to total revenue, forecast demand, and the rooms it can actually assign.

How do you estimate the room revenue at risk?

Start with the room nights that would be unavailable, the occupancy you expected, and the expected average daily rate (ADR) for those dates. Then separate guests relocated within the hotel, canceled reservations, and rooms that had no forecast demand. That lets finance tell affected capacity apart from estimated revenue.

Repeat the exercise for dates with different demand. If you can move guests to another room category or building, check the available capacity and the operating cost of relocating them. Record your assumptions next to the calculation. That way you can update it as bookings change without mistaking potential exposure for a confirmed loss.

What should a hotel check before reopening an area?

Define the conditions for returning each area to service. Include inspecting the openings, cleaning and drying where needed, utilities, access, and staffing. The Ready.gov hurricane toolkit for businesses offers a framework for assigning responsibilities and planning for continuity.

A complete building envelope means every opening is protected. Differential pressure is the difference in air pressure between inside and outside. Internal pressurization happens when wind enters through a broken opening and pushes the walls and roof outward. Walking the openings also reveals service and circulation areas that could affect rooms elsewhere in the building.

How do you evaluate hurricane protection for hotels in Mexico?

Tie the proposal to the openings, the areas that depend on them, and the system's technical evidence. The Hurricane Solution HS-1500 system is rated for Category 5 hurricanes, with a Miami-Dade NOA and ASTM E1996-09 Level E certification. A Notice of Acceptance (NOA) is Miami-Dade County's product approval. Its documents describe the screen-and-anchor assembly.

For a hotel protection project, bring the opening plan, the list of critical areas, and the operating schedule to the assessment. Ask the proposal to specify what goes in each zone. Use the revenue exposure model to compare priorities, and have the hotel's scope quoted based on the free technical assessment.

MetricWhat it recordsDecision it supports
RevPARRoom revenue per available roomCompare periods on a consistent basis
Unavailable nightsPhysical capacity temporarily lostPlan relocations and inventory
Revenue at riskEstimate based on expected occupancy and ratePrioritize zones and dates
Reopening conditionsPending inspections, staffing, and servicesAuthorize the return to inventory

Walk through the scenario at the budget meeting with maintenance, reservations, and purchasing. Ask each department to confirm the data it controls, such as inventory, demand, or inspection times. If a figure is uncertain, record the range the hotel uses. That lets you update the model when the protection scope or operating calendar changes.

Hypothetical example: one wing out of order at a Cancún hotel

Suppose 20 rooms would be unavailable for three nights. That is 20 × 3 = 60 room nights. With 75% forecast occupancy and a $200 USD ADR, the illustrative exposure is 60 × 0.75 × $200 USD = $9,000 USD in room revenue. These assumptions are for comparing scenarios. They are not an actual loss or savings attributed to the system.

If operations can move some demand to another wing, the hotel can reduce that exposure. Finance should adjust the calculation for availability and the cost of moving guests. Engineering reviews which repairs and inspections must happen before the rooms return to inventory.

When should you consider a different system?

If the property can't deploy removable screens with its own staff and access, evaluate an option that fits its plan. The decision should also account for services that can delay reopening, such as power, water, or access to the property. Protecting openings is one part of a hotel's preparedness.

How do you decide?

  1. Identify the rooms, services, and routes that depend on each façade.
  2. Model unavailable nights, forecast occupancy, and relocation capacity.
  3. Have engineering confirm the configuration and evidence of the proposed systems.
  4. Agree with operations on the requirements for returning each zone to inventory.

In summary

  • RevPAR measures revenue per available room.
  • Track affected physical capacity and unavailable nights separately.
  • Use explicit rate and demand assumptions when you estimate revenue at risk.
  • If you can only do one thing, link your critical openings to the areas that could go out of service.
  • Hurricane Solution installs certified hurricane protection in Mexico and quotes the hotel scope during the assessment.

To define the system and scope for your property, request a free technical assessment from Hurricane Solution.

Frequently Asked Questions

How does RevPAR relate to hurricane protection for hotels in Mexico?

RevPAR measures room revenue per available room. To assess a hotel's exposure to a disruption, pair it with out-of-order rooms, unavailable nights, and forecast occupancy. That data separates the hit to physical capacity from any change in the revenue metric.

How is hotel protection quoted?

A hotel's quote is set after a free technical assessment. The team reviews the openings, their dimensions, the mounting substrate, and access to each area. An up-to-date floor plan and a list of priority zones help define the scope, so operations, purchasing, and engineering all review the same proposal.

How is the cost of Hurricane Solution protection calculated?

Hurricane fabric protection systems are custom-engineered based on high-velocity wind-load calculations, opening spans, mounting substrates, and motorization requirements. Contact our engineering team directly for a precise project calculation. The final price is confirmed after a free technical assessment. Measure the windows and doors you want covered to estimate the area. Hotel and commercial projects are quoted during the assessment. To request a quote, message us on WhatsApp.

How do I check what a Miami-Dade approval covers at a hotel?

Ask for the file number and drawings of the proposed assembly. An architect, engineer, or insurer can review whether the approval documents the screen, the fasteners, and the substrate in each zone. Ask that the proposal flag any openings where the configuration still needs technical review.